My Tutorials are strictly my own creations if they

resemble anothers it is purely coinsidense.This is 

written with the use of PSP X2 but I am sure will

work in any other PSP's as well. And for those of

that have basic knowledge of PSP.

You Will Need.

Art I am using is from Ismael Rac "Date Me Tube" you must purchase a License to use His art you can do so HERE

Scrap  It's a Pimptress Thing Under my FTU Scraps

Template missy_tagtemplate417 From Missy HERE

PlugIn Needed Xero-Porcelain HERE

Animation Shop HERE

Font Arial you can get HERE (should have on your computer already)

Drop Shadow used threw entire Tut 2,2, 60, and 4 but feel free to use what you prefer.

Open Temp Hold Shift and D at the same time to Duplicate and Close Original.

Few things I did to get the Temp ready was I Deleted Copy rights, Thin Rectangle Center, Rectangle (Top smaller Layer labeled this not back layer), Rectangle Back (Top smaller Layer labeled this not back layer) Layers. 

Merged Frame Back Layer down to Raster 18 Layer. And I also changed the color of the pink layers to a friendlier pink from the scrap I chose to use. 

By Effects-Photo Effects-Black and White Film every layer then using Adjust-Hue And Saturation-Manual Color Correction. Source the grey from the temp layers and Target a pink from scrap.

Now working on bottom Rectangle Selections-Select All, Selections-Float, Selections-Defloat. Open paper7 Edit-copy, Edit-Paste as new layer. Selections-Invert, Hit Delete. Selections-Select None.

Open Element Curtain Edit-Copy, Edit-Paste as new layer. Above Center rectangle layer. Image-Resize 70%. Move up a bit but keep in center of tag see mine for placement.

Circle Layer Selections-Select All, Selections-Float, Selections-Defloat. Selections-Modify-Smooth Default settings. Add new Raster. Open Paper11 Edit-Copy, Edit-paste into Selection. leave Selected.

Open Close up of Tube Select layer options you want to use if using a Rac Tube. I chose pink to match my scrap. Edit-Copy Special-Copy Merged. Back to Temp on top of paper11 we just pasted and Edit-Paste as new layer. Position to your liking. Selections-Invert. Hit Delete. Selections-Select None.

Working on Close Up we just pasted. On top layer. Adjust-Blur-Gaussain Blur 4, Change to Hard Light, On Bottom layer use Xero-Porcelain. And Effects-Photo Effects-Black and White Film. 

Open Element sparkles Edit-Copy, Edit-Paste as new layer. Change to Soft Light.

Now Working on Frame Back that we merged to Raster 18 in the beginning. Selections-Select all, Selections Float, Selections-defloat. Choose color from scrap and add new raster flood fill. I used pink.

Now I opened the close up I used earlier and Edit-Copy Special-Copy Merged. Edit-Paste as new image. Image-Resize 85% Then Image-Mirror. Edit-copy. Back to Temp.

Using the Frame Layer I click on the top square only with magic wand. Selections-Modify-Expand by 3 Then Edit Paste as new layer. And position close up to your liking. Selections-Invert. Hit Delete. Selections-Select None.

Repeat these steps till all four squares have the new close up in them. 

Now this is very important click Crop Merged Opaque. And Click Crop.

Merge all the close up layers in the small frame together. Duplicate this layer on top layer Adjust-Blur-Gaussian Blur 4. Change to Hard Light. On bottom layers. Apply Xero-Porcelain. And Effects-Photo Effects-Black and white Film.

Open Card Element I chose to cover the white square by using Selections Tool Rectangle I simple drew the rectangle on top of the white square added new raster and flood filled with black. Then merged down. Edit-copy, Edit-Paste as new layer above frame layer. Image-Resize 70%.

I moved the star layers around to my liking also you can often look back at my tag for placement.

Bodice2 Edit-Copy, Edit-paste as new layer. Image-Resize 50% place to lower left of tag.

Perfume2 Edit-Copy, Edit-Paste as new layer Image-Resize 60%. Place near bodice.

Cake Edit-Copy, Edit-Paste as new layer Image-Resize 80%. Place to lower right of tag.

Bow1 Edit-Copy, Edit-Paste as new layer Image-Resize 35% Place in upper middle of curtain.

Lips Edit-Copy, Edit-Paste as new layer. Image-Resize 40% Image-Free Rotate to the left 22%. Place in upper left of tag.

Open Main Tube Edit-Copy, Edit-Paste as new layer Image-Resize 85%. Place to right of tag. Image-Duplicate. On top layer Adjust Blur-Gaussain Blur 4 Soft Light. On bottom layer apply Xero-Porcelain.

Hair Comb2 Edit-Copy, Edit-Paste as new layer. Image-Resize 50%. Place to right side of the card make sure not to cover up name place.

Earings Edit-Copy, Edit Paste as new layer Image-Resize 45%. Place in between comb and cake.

Heels Edit-Copy, Edit-Paste as new layer. Image-Resize 35% Place on left side of card.

Now add drop shadows you prefer.

Delete Un-needed layers.

Resize to desired size I chose 650 on its longest side.

Add Proper Copy Rights.

Add Name you prefer I used Font Arial to match the card I used for the name plate feel free to use what you feel comfortable with.

Now if not animating save now as .PNG and thank you for trying my tutorial.

If animating proceed.

Aniamtion

Now Open the White Background Layer. Very Important as animation will make it blotchy in the back if you dont.

You need to go to the Frame layers where you should have the four closeups of the face. Close off the frame the background frame and the closeups top and bottom layers.

Now going down from your frame layers close off every layer. This leaves all your top layers open. The tube, Elements, Copy Right, Name Etc. Merge Visable.

close off your top layer now and open the next layer should be your frame layer and the closeups with the background layer. Merge visable. now close off this layer.

Open all your bottom layers left including the white background layer. and merge visable.

You should now have three layers. the top layer, the middle only the side frame and four closeups of the face and background to them, and the bottom layer.

Open your animation shop.

Click on the middle layer of the frames. Edit-Copy. In Aniamtion Edit-Paste as new animation.

Go to Effects-Insert Image Effect. Choose Scratches (Effect Length set to 2.7 secs, Frames per Second 4fps, Effect contains 10 frames. Animation frame and run effect in reverse direction both checked.)

Delete 11th layer. For Test View Aniamtion you should now see your frames have what look like static lines in them.

Next go back to PSP Edit-Copy Bottom layer.

Back in Animation Paste as new animation. Duplicate this layer till you have ten frames.

Click on Frame Layer Edit-Select All, Edit-Copy. Click back to the bottom layer. Edit-Select All, Edit-Paste Into Selected Frame. Place to left of bottom layer I used the grid like paper I used for the background rectangle as a guide for the frames placement. 

Back to PSP Click on top Layer of the Tag Edit-Copy Back to Animation Paste-As new animation. Duplicate Layer till ten frames. Edit-Select All. Edit-Copy.

Working on the tag bottom and frame layers we just made Edit-Select All, Edit-Paste into Selected Frame.

View your animation. See if you like.

Save animation. 

Thank you for trying my tutorial.